Witter ZX302EU Porte-vélos Witter (2 vélos) fixé sur attelage à l'aide d'un levier verrouillable
Commerce - Connectez-vous pour voir les prix et acheter
| Fabricant | Witter |
| Référence | ZX302EU |
| Porte-vélos | Porte-vélos fixé sur un attelage |
| Nombre de vélos | 2 vélos |
| Charge utile maximale (Kg) | 34 |
| Diamètre des pneus de vélos (mm) | 60 |
| Distance entre les rails (mm) | 160 |
| Temps de montage de [min] | 0 |
| Mécanisme de charnière | Oui |
| Dispositif antivol | Oui |
| Empattement maximal (mm) | 1300 |
| Nom du produit | Witter ZX302EU Porte-vélos Witter (2 vélos) fixé sur attelage à l'aide d'un levier verrouillable |
| Diamètre du cadre de vélo (mm) | 60 |
| Extension 4ème vélo | Non |
| Lumière | standard |
| Pliable pour faciliter le rangement | Non |
| Poids max par vélo (kg) | 17 |
| Empattement du porte-vélo | 550 |
| Validation TUEV/DEKRA | Non |
| Garantie | 3 ans |
| Temps de montage jusqu'à [min] | 15 |
| Extension 3ème vélo | Non |
| Pré-équipé | Non |
| Griffes détachables | Non |
| Compatible uniquement sur les attelages standards | Non |
| Poids [kg] | 15.6 |
The ZX302EU bike carrier from Witter is platform based and takes up to two cycles of any size including a child’s.
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with two support arms attached to the back hoop to hold the cycles into position
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 30 minutes (instructions are included in the box)
The carrier clamps directly to the towball using a lockable clamp-down lever making it suitable for any type of towbar.
- Wheel handles on cycle support arms can be upgraded to lockable handles to secure cycles to the carrier
- Carrier can be locked to the towball
- Simple tilt action allows access to the vehicle boot with bikes loaded
- Adjustable wheel holders accommodate most cycle sizes
- The carrier comes with two support arms attached to the back hoop to hold the cycles into position
- Supplied with light board and NEW 2in1 electric plug to accommodate both 7pin and 13pin sockets—no adaptor needed
Carrier requires an initial assembly taking approx. 30 minutes (instructions are included in the box)
Véhicules compatibles
We don't have any compatibility data for this vehicle.